March 0125-0123-0400 BC-2CP-MD Magnetic Drive Pump Series 2

Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.

March Pump's industrial BC-2CP-MD Brush Type is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and solar equipment. It is capable of generating a maximum flow of 6 gallons per minute at 1 foot, and its maximum head is 15 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.375 female pipe thread and 0.75 male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brushtype Motor, available in 12 or 24 Volts. The 12 Volt Motor has an operating range from 0 to 14 Volts, and the 24 Volt Motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March BC-2CP-MD Brush Type centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March BC-2CP-MD Brush Type is suitable for your application, please contact March Pump.

Housings: Polypropylene or Delrin
O-Ring: Buna N, Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Polypropylene or Delrin

Applications for the BC-2CP-MD Brush Type Mag Drive Pump include chemical recirculation, chemical transfer, and solar systems.

The BC-2CP-MD Brush Type has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The BC-2CP-MD Brush Type may have been modified to handle these chemicals. Please contact March Pump to review your application before using the BC-2CP-MD Brush Type for any of the above listed chemicals.