0130-0158-0200 March Centrifugal Magnetic Drive Pump
LC-3CP-MD March Mag Drive Pump with Inlet 3/4"FPT, Outlet 1/2"MPT.
March 0130-0158-0200 Magnetic Drive Pump LC-3CP-MD Series 3. MAX Flow 8.5 GPM / 31 LPM, Horse Power .05 HP / .037 KW, Electrical 115V 50/60HZ
Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
Industrial LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (or around 8PSI). The LC-3CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Cupric Nickel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord are also in contact with the solution. The inlet connection is .075 inch female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-3CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March LC-3CP-MD is suitable for your application, please contact March Pump.
Marine Mounting Base with Grommets
The most common application for the LC-3CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.
The LC-3CP-MD has pumped Fresh Water and Salt Water. The LC-3CP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the LC-3CP-MD for any of the above listed chemicals.
Customer Questions & Answers
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?