March 0135-0174-0400 MDXT-3 Centrifugal Pump Magnetic Drive
March 0135-0174-0400 MDXT-3 230V Centrifugal Pump Magnetic Drive
March Pump’s industrial MDXT-3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1/2 inch female pipe thread, and the outlet is 3/8 inch female pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDXT-3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
- O-Ring: Buna N, Viton, or Teflon
- Encapsulated Impeller
Applications for the MDXT-3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
The MDXT-3 has pumped has pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and many more chemicals. The MDXT-3 may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Buna N (O-Ring), Ceramic Magnet|
|Max Internal Pressure||50 psi ( 3.4 bar)|
|Max Liquid Temperature||190 °F (87 °C)|
|Max Flow Rate||8.5 GPM (32.2 LPM)|
|Max Head||19 FT (5.8 M)|
|Power||0.04 HP (0.03 KW)|
|Max Flow Rate||7.9 GPM (30 LPM)|
|Max Head||13.1 FT (4 M)|
|Power||0.004 HP (0.03 KW)|
|Position||Part Number||Part Details||Required Quantity||Visualize||Price|
|3||0135-0039-1000||March 1/16” CS x 2-7/8” OD “O” Ring (Buna N)||1||$3.00|
|3||0135-0046-1000||March 1/16” CS x 2-7/8” OD “O” Ring (Viton)||1||$4.00|
|3||0135-0122-1000||March 1/16” CS x 2-7/8” OD “O” Ring (Teflon)||1||$12.00|
|4||0130-0028-1000||March Thrust Washer (Ceramic)||1||$4.00|
|4||0135-0130-0200||March 2.062" Dia. Encapsulated Impeller (Polypropylene)||1||$46.00|
|5||0809-0160-1000||March Shaft (Ceramic)||1||$9.00|
|6||0135-0043-0100||March 2.062 Dia. Impeller with Bare Ceramic Magnet (Polypropylene)||1||$17.00|
|7||0135-0171-1000||March Rear Housing with 3/8" FPT Outlet (Polypropylene)||1||$10.00|
|8||0135-0126-0100||March Drive Magnet||1||$35.00|
|9||0618-0027-1000||March #8-32 x 5/8" Long Screw (Stainless)||4||$0.50|
|10||0620-0010-1000||March #8 Lock Washer (Stainless)||4||$0.30|
|11||0135-0168-0100||March Motor Bracket (Plastic)||1||$22.00|
|12||0135-0036-1000||March Motor, 1 Phase, 115V, 50/60 Hz, 3450 RPM||1||$135.00|
3 Foot Cord
50Hz: 1Ph 115V 0.04HP/0.03kW, 1.55 AMPS, 2850 RPM
60Hz: 1Ph 115V 0.04HP/0.03kW, 1.55 AMPS, 3450 RPM
3 Foot Cord
60Hz: 1Ph 230V 0.04HP/0.03kW, 0.7 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.04HP/0.03kW, 0.7 AMPS, 2850 RPM
2 WARNING:This product can expose you to chemicals including Ethylene Oxide, which is know to the state of California to cause cancer or birth defects or other reproductive harm.
4 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.
5 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.