March 0150-0004-0400 5C-MD Centrifugal Pump Magnetic Drive
March Pump's industrial 5C-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 15 gallons per minute at 2 feet, and its maximum head is 27 Feet (or around 11PSI). The 5C-MD pump must be submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Noryl, and the Cord are also in contact with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 male pipe thread.
The most common applications for the 5C-MD Magnetic Drive Pump are marine air conditioning and fountains.
The 5C-MD has pumped Fresh Water and Salt Water. The 5C-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 5C-MD for any of the above listed chemicals.
|Max Flow Rate - 50Hz||14.5 GPM (54.8 LPM)|
|Max Flow Rate - 60Hz||14.5 GPM (54.9 LPM)|
|Max Head - 50Hz||19.6 FT (6 M)|
|Max Head - 60Hz||27 FT (8.2 M)|
|Power - 50Hz||.125 HP (.093 KW)|
|Power - 60Hz||.125 HP (.093 KW)|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet|
|Max Liquid Temperature||130 °F (54 °C)|
Note: Product image may be different than actual product received.
Limited Warranty: March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water.
|Position||Part Number||Part Details||Required Quantity||Visualize||Price|
|B||0150-0032-1000||March Cover with 1" FPT Inlet (Polypropylene)||1||$10.00|
|C||0135-0007-1000||March 1/16" CS x 3" OD "O" Ring (Buna N)||1||$3.00|
|F||0150-0030-0100||March Impeller with Bare Ceramic Magnet (Polypropylene)||1||$28.00|
|K||0150-0020-1000||0150-0020-1000 - March by March||1||$5.00|