March 0150-0004-0500 LC-5C-MD Centrifugal Pump Magnetic Drive
Description: 0150-0004-0500 115V LC-5C-MD March Magnetic Drive Centrifugal Chemical Pump. 14.5 GPM (60Hz)/14.5 GPM (50Hz) Max Flow, 27 FT (60Hz)/19.6 FT (50Hz) Max Head, .125 HP
March Pump's industrial LC-5C-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 15 gallons per minute at 2 feet, and its maximum head is 27 Feet (or around 11PSI). The LC-5C-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Noryl, and the Cord are also in contact with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread.
The most common application for the LC-5C-MD Magnetic Drive Pump is for marine air conditioning and fountains.
The LC-5C-MD has pumped Fresh Water and Salt Water. The LC-5C-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the LC-5C-MD for any of the above listed chemicals.
|Max Flow Rate - 50Hz||14.5 GPM (54.8 LPM)|
|Max Flow Rate - 60Hz||14.5 GPM (54.9 LPM)|
|Max Head - 50Hz||19.6 FT (6 M)|
|Max Head - 60Hz||27 FT (8.2 M)|
|Power - 50Hz||.125 HP (.093 KW)|
|Power - 60Hz||.125 HP (.093 KW)|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Shaft, Thrust Washers), Ceramic Magnet|
|Max Liquid Temperature||130 °F (54 °C)|
|Uses||Submersible or Open Air|
Note: Product image may be different than actual product received.
Limited Warranty: March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water.
|Position||Part Number||Part Details||Required Quantity||Visualize||Price|
|A||0150-0021-1000||March #8-32 x 1-3/4" Long Screw (Stainless)||7||$0.75|
|B||0150-0032-1000||March Cover with 1" FPT Inlet (Polypropylene)||1||$10.00|
|C||0135-0007-1000||March 1/16" CS x 3" OD "O" Ring (Buna N)||1||$3.00|
|F||0150-0030-0100||March Impeller with Bare Ceramic Magnet (Polypropylene)||1||$28.00|
|G||0802-0008-1000||0802-0008-1000 - March by March||2||$0.60|
|H||0802-0006-1000||March #10 Washer (Stainless)||2||$0.50|
|I||0150-0153-0200||0150-0153-0200 - March by March||1||$26.00|
|J||0150-0155-1000||0150-0155-1000 - March by March||1||$24.00|
|K||0150-0020-1000||0150-0020-1000 - March by March||1||$5.00|
|L||0125-0007-1000||March Cooling Tube Seal (Buna N)||2||$1.00|