March Pump's industrial TE-5C-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 18 gallons per minute at 1 foot, and its maximum head is 50 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread.
- O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
- Shaft: Ceramic or 316 Stainless Steel
- Imp. Bushing: Carbon or Mica Teflon
Applications for the TE-5C-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, small scrubbers, detergent mixers, and carbon arc furnace cooling.
The TE-5C-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5C-MD-AM may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5C-MD-AM for any of the above listed chemicals.
|Max Flow Rate - 50Hz||18 GPM (68 LPM)|
|Max Flow Rate - 60Hz||18 GPM (68 LPM)|
|Max Head - 50Hz||50 FT (15.2 M)|
|Max Head - 60Hz||50 FT (15.2 M)|
|Power - 50Hz||.125 HP (.093 KW)|
|Power - 60Hz||.125 HP (.093 KW)|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)|
|Max Liquid Temperature|