Finish Thompson 107324-2 Drum Pump Motor

Series S2 Motor of Finish Thompson with Nominal Voltage 116

Description: Finish Thompson 107324-2 S2 series electric motor. Continuous Duty Cycle, Max. Flow 17 GPM, Input Power 1/2 HP

Model#: 107324-2 | Series#: S2

Price: $32100 $27227

Availability:Ships within 2 to 3 weeks Click for Parts Breakdown
$32100 $27227
Ships from US
select 2 to 4 items to compare.
Electric motor

Check that the motor switch is in the center "O" OFF position, and then plug the power cord into an outlet. Insert the pump tube into the fluid to be dispensed and the discharge hose into the container to be filled. While holding the motor handle and hose, switch the motor to the "I" low speed. The fluid will begin to pump. If more flow is desired, switch the motor to the "II" high speed setting. See figure 9 below. If the motor stops working and the reset button has popped out, press the switch to the off position "O". Review your application to make sure it is within the capabilities of the pump (reset button pops typically from an overloading situation). Allow the motor to cool down for at least 30 minutes and then press in the reset button located on the side of the motor handle.

Series Data
Nominal Voltage230
Hertz50/60
Rated Amps1
Input Power (HP)1/2
Input Power (Watts)250
Duty CycleContinuous
RPM (low / high speed)8,000 / 14,000
Max. Flow (GPM)17
Max. Flow (l/m)64
Max. Head (ft)20
Max. Head (m)6
Max. Air Pressure / CFMN/A
EnclosureDouble Insulated, IP24 Splash-Proof
Document Title Download
S6 Motor Technical FlyerClick Here to Download
S6 12-Volt Motor ManualClick Here to Download
S Series Motor ManualClick Here to Download