GP22PVD016018
GP22PVD016018 Finish Thompson Mag Drive Centrifugal Pumps
Series GP22 Sealed Magnetic Drive Centrifugal Pump of Finish Thompson
Description:
Finish Thompson GP22PVD016018 Plastic Sealed Magnetic Drive Centrifugal Pump. Suction Port Size 2in, Construction Material Polypropylene, Maximum specific gravity Up to 1.8
Model#: GP22PVD016018 | Series#: GP22
Price: $193000
Deprecated: base64_decode(): Passing null to parameter #1 ($string) of type string is deprecated in phar:///home/pni/wms/vendor/ProjectLibraries/WMS.phar/SingleProductAbstract.php on line 2232
Deprecated: round(): Passing null to parameter #1 ($num) of type int|float is deprecated in phar:///home/pni/wms/vendor/ProjectLibraries/WMS.phar/ProductDisplay/SingleProductTab.php on line 274
×
GP22PVD016018 Finish Thompson Mag Drive Centrifugal Pumps
Finish Thompson GP22PVD016018 Plastic Sealed Magnetic Drive Centrifugal Pump. Suction Port Size 2in, Construction Material Polypropylene, Maximum specific gravity Up to 1.8
$193000 /ea
Ships from Connecticut US
The GP Series
Corrosion resistant centrifugal pumps are available with a wide selection of mechanical seals. Seals are externally mounted eliminating the need for exotic, expensive materials. All wetted components are nonmetallic. These value packed industrial pumps provide reliable service in corrosive environments and are suitable for a broad range of chemicals.
The GP Series accept NEMA or IEC motors and feature NPT, BSP, or flanged connections.
Features :
- Mechanical seal horizontal centrifugal pump
- GF Polypropylene or CF PVDF corrosion resistant construction
- Accepts standards NEMA 56C, 145TC, 143-184JM, or IEC 80, 90, 100, and 112 motor frames
- Up to 7 1/2 Hp (3.0 kW) motors
- Back pull-out feature enables fast access for pump maintenance
- Close coupled or pedestal mounted
- Bellows, multi-spring or double seals
- Carbon, FKM or ceramic standard seal materials
- FKM or EPDM o-rings standard
- Up to 1.8 specific gravity with no impeller trimming
- Port sizes: 1.5” x 1.5”, 2” x 2”, 3” x 2”
- Maximum temperature: Polypropylene - 180oF (82oC), PVDF - 220oF (104oC)
- Maximum working pressure: 35 psi / 2.4 Bar (GP11), 55 psi / 3.8 Bar (GP22/32)
Applications :
- Chemical processing, spraying, transfer
- Plating recirculation/filtration, PCB etching/rinse
- Mild corrosive or low budget applications where periodic seal replacement is not an issue
| Series Data | |
| Suction Port Size (in) | 2 |
|---|---|
| Discharge Port Size (in) | 2 |
| Connection Types | NPT or BSP |
| Maximum Specific Gravity | Up to 1.8 |
| Maximum Working Pressure (psi) | 55 |
| Maximum Working Pressure (bar) | 3.8 |
| Flow Range (gpm) @3450 RPM | 16 to 200.9 |
| Flow Range (m3/h) @2900 RPM | 3.4 to 45.7 |
| Maximum Head (ft) @3450 RPM | 123 |
| Maximum Head (m) @2900 RPM | 26.3 |
| Power Range (hp) @3450 RPM | 1.5 to 5.3 |
| Power Range (kW) @2900 RPM | 0.55 to 2.3 |
| Type | Mechanically Sealed |
| Configuration | Horizontal |
| Construction Materials | Polypropylene |
| O-ring Materials | FKM or EPDM |
| Seal Types | Bellows, Multispring, or Double |
| Rotating Face Materials | Carbon, PTFE, Siliconized Carbon, SiC, or Ni-Resist |
| Stationary Face Materials | Ceramic, SiC, or Ni-Resist |
| Elastomer Materials | FKM, EPDM, or Kalrez® |
| Maximum Temperature (F) | 180 |
| Maximum Temperature (C) | 82 |
| Product Dimensions | |
| Weight | 0.00 lb |
| Width | 127.00 mm, 5.00 in |
| Height | 127.00 mm, 5.00 in |
| Length | 127.00 mm, 5.00 in |
| Document Title | Download |
|---|---|
| Product Brochure | Click Here to Download |
| Manual | Click Here to Download |
| Curves | Click Here to Download |
| Technical Flyer | Click Here to Download |
Customer Questions & Answers
Searching for relevant results...
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?