Pulsatron LC13BA-KTC1-XXX Electronic Metering Pump
Series T7 Pulsatron Metering Pump with Connection Size Tubing .25 in I.D. x .38 in O.D./.25 in Ball, 0 - 1.88 gph
Description: Pulsatron LC13BA-KTC1-XXX Series T7 Electronic Metering Pump. 0.50 gph/12 gpd (1.9 lph) Max Pressure: 100 psi (7 bar), Pump Head & Fittings/Seats & O-rings/Balls: PVDF/TFE/Ceramic
The PULSAtron product line has evolved into a philosophy of design that continues to set the standards for the entire industry. Our engineers have developed a guided check valve system with a proven 'seat and ball' design that ensures reliable and accurate metering year after year.
Our fin cooled Solenoid enclosure dissipates heat ensuring that the pressure handling capability of the pump can be maintained. The thermally protected solenoid protects the pump from seizing up in extreme heat conditions with an automatic reset feature allowing the pump to resume operation up on cool-down. All PULSAtrons are tested and rated under hot conditions guaranteeing that the flow and pressure ratings meet the specifications. There are no standards when it comes to the type of chemicals our pumps may encounter. Therefore we offer a variety of wet-end materials that the customer can choose from. Every pump is 'configured to order' with the customer designated wet-end materials that match the chemical requirements of the target application.
With more than 10 years of product evolution, the PULSAtron family continues to set the standard with the Degas Five Function Valve. PULSAtron can handle a variety of gaseous solutions. The PULSAtron family consists of seven unique series with 78 flow and pressure envelops to select from. Most models include our standard bleed valve assembly, foot strainer, injection valve and tubing. No matter what your application is, choose the PULSAtron that is right for you.
The Pulsation Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications. A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous 'ON' mode and the ability to adjust the stroke length from 0 to 100%. Four distinct models are available, having pressure capabilities to 100 psi (7.0 bar) @ 12 gpd (1.9 lph), and flow capabilities to 48 gpd (7.6 lph) @ 50 psi (3.3 bar), with a turndown ratio of 10:1. Metering performance is reproducible to within +/- 3% of maximum capacity.
- Complete timer control in one unique package
- Solid state 7 day electronic timer
- Isolated from earth ground
- Few moving parts and wall mountable
- Safe and easy priming with durable leak-free bleed valve assembly (standard)
|LC13BA-KTC1-XXX Product Specific Data|
|Model||0.50 gph/12 gpd (1.9 lph) Max Pressure: 100 psi (7 bar)|
|Liquid End Materials:Pump Head & Fittings/Seats & O-rings/Balls||PVDF/TFE/Ceramic|
|Connection Size||Tubing .25 in I.D. x .38 in O.D./.25 in Ball, 0 - 1.88 gph|
|Suffix Code||No Additional Options|
|Pump Head Materials||GFPPL, PVC, PVDF, 316 SS|
|Fitting Material Available||GFPPL, PVC, PVDF|
|Bleed Valve||Same as fitting and check valve selected (except 316SS)|
|Seat O-Rings Available||PTFE, CSPE, Viton|
|Balls Available||Ceramic, PTFE, 316 SS, Alloy C|
|Tubing Available||Clear PVC, White PE, PVDF|
|Power Input||115 VAC - 50/60 HZ -1 ph, 230 VAC - 50/60 HZ|
|Peak Input Power||300 Watts, Average Input Power at Max SPM: 130 Watts|
|Average Current Draw||115 VAC: Amps - 1.0, 230 VAC: Amps - 0.5|
|Weight||10 lb [4.54 kg]|
|Width||735.48 cm [289.56 in]|
|Height||606.45 cm [238.76 in]|
|Length||864.51 cm [340.36 in]|