Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
March Pump’s industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Carbon/Teflon, and Stainless Steel. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Housings: Polypropylene or Carbon Filled Kynar
O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Nylon or Carbon Filled Kynar
Stainless Steel Base Available
Applications for the AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.
Type | Centrifugal Pump |
---|---|
Model | AC-1A-MD-1/2 |
Series | 1 |
Max Flow Rate - 50Hz | 3 GPM (11.3 LPM) |
Max Flow Rate - 60Hz | 2.3 GPM (9 LPM) |
Max Head - 50Hz | 4.6 FT (1.4 M) |
Max Head - 60Hz | 3.3 FT (1.0 M) |
Power - 50Hz | .005 HP (.003 KW) |
Power - 60Hz | .005 HP (.003 KW) |
Electrical Voltage | 115V |
Electrical Amp | .45A |
Submersible | No |
Inlet | 1/2" OD |
Outlet | 1/2" OD |
Wet End | Polypropylene, Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft) |
Max Liquid Temperature | 190 °F (87 °C) Open Air, 130 °F (54 °C) Sub, 190 °F (87 °C) |
Uses | Submersible or Open Air |
Brand | March |
Electrical/Air | 230V |
Max Internal Pressure | 50 psi (3.4bar) |
@60Hz | .. |
Max Flow Rate | 3 GPM (11.3 LPM), 2.3 GPM (9 LPM) |
Max Head | 4.6 FT (1.4 M), 3.2 FT (1 M) |
Power | 0.005 HP (0.003 KW) |
@50Hz | .. |