DL34-XX

Flowline DL34-XX Multi-Function Ultrasonic Level Transmitter

Price: $650.00 - $700.00

DL34 Series Ultrasonic Level Transmitter :
Application

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.ft (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.

Fields of Application:
  • Level detection, switch and control functions up to 18.0ft (5.5m)
  • Configuration is fast and easy via WebCal software and USB adapter
  • Narrow 3'' beam width and short 8'' dead band optimized for small tanks
  • Four programmable relays for switch, pump or valve control and fail-safety
    • 1 pump or valve with 3 alarms
    • 2 pumps (lead-lag) with 2 alarms
    • Pumps (duplexing) with 2 alarms
    • Independent switch point alarms
  • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
  • Automatic temperature compensation for accurate measurement
Compatible Products:

LI25, LI55, LI90, LC52.

 
Range18.0ft (5.5m)
Contact Rating60 VA, 1A maximum
Accuracy±0.2% of range
Contact fail-safePower loss: Hold last Echo loss: Open, close or hold last
HysteresisSelectable
Resolution0.079
Process Temperature20°F to 140°F (-7°C to 60°C)
Dead Band8 in (20cm)
Temperature CompAutomatic
Beam Width3in (7.6cm)
Ambient Temperature-31°F to 140°F (-35°C to 60°C)
ConfigurationWebCal PC Windows USB 2.0
PressureMWP = 30 PSI (2 bar)
MemoryNon-volatile
Supply Voltage24 VDC (loop)
Enclosure RatingType 6P, encapsulated, corrosion resistant & submersible
Consumption0.5W
Enclosure MaterialPolycarbonate
Loop Resistance400Ω max
Trans MaterialPVDF
Signal Output4-20 mA, two-wire
Cable Jacket MaterialPolyurethane
Signal Invert4-20 mA or 20-4 mA
Cable Type9-conductor, shielded
Signal Fail-safe4 mA, 20 mA, 21 mA, 22 mA or hold last
Cable Length48in (1.2m)
Process Mount2in NPT (2in G)
Contact TypeSPST relays
Contact Rating60 VA, 1A maximum
Mount GasketViton
Contact fail-safePower loss: Hold last Echo loss: Open, close or hold last
ClassificationGeneral purpose
ComplianceCE, RoHS
HysteresisSelectable
ApprovalscFMus
Process Temperature20°F to 140°F (-7°C to 60°C)
TypeLevel Transmitter
SeriesDL34
Temperature CompAutomatic
Ambient Temperature-31°F to 140°F (-35°C to 60°C)
PressureMWP = 30 PSI (2 bar)
Enclosure RatingType 6P, encapsulated, corrosion resistant & submersible
Enclosure MaterialPolycarbonate
Trans MaterialPVDF
Cable Jacket MaterialPolyurethane
Cable Type9-conductor, shielded
Cable Length48in (1.2m)
Process Mount2in NPT (2in G)
Mount GasketViton
ClassificationGeneral purpose
ComplianceCE, RoHS
ApprovalscFMus
TypeLevel Transmitter
SeriesDL34
Document TitleDownload
DatasheetClick Here to Download
ManualClick Here to Download
Quick StartClick Here to Download
BrochureClick Here to Download
IDShort DetailsPrice 
DL34-00Process mount: NPT (US), Fob USB adapter: Without Fob$650.00
DL34-01Process mount: NPT (US), Fob USB adapter: With Fob$695.00
DL34-10Process mount: G (Metric), Fob USB adapter: Without Fob$655.00
DL34-11Process mount: G (Metric), Fob USB adapter: With Fob$700.00