March Pump's industrial LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (or around 8PSI). The LC-3CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Cupric Nickel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord are also in contact with the solution. The inlet connection is 3/4 inch female pipe thread, and the outlet is 1/2 inch male pipe thread.
- Marine Mounting Base with Grommets
The most common application for the LC-3CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.
The LC-3CP-MD has pumped Fresh Water and Salt Water. The LC-3CP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the LC-3CP-MD for any of the above listed chemicals.
|Max Flow Rate - 50Hz||8.2 GPM (31 LPM)|
|Max Flow Rate - 60Hz||8.5 GPM (32.2 LPM)|
|Max Head - 50Hz||14.1 FT (4.3 M)|
|Max Head - 60Hz||19 FT (5.8 M)|
|Power - 50Hz||.05 HP (.037 KW)|
|Power - 60Hz||.05 HP (.037 KW)|
|Electrical Voltage||115V, 230V|
|Electrical Amp||2A(60Hz)/2.3A(50Hz), 1A(60Hz)/1A(50Hz)|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Ceramic (Shaft, Thrust Washer), Ceramic Magnet|
|Max Liquid Temperature||130 °F (54 °C)|
|Uses||Submersible or Open Air|