LI40
LI40-1001 Flowline PodView Level Indicator
Price: $275.00
Application
The general purpose indicator displays tank level or volume in engineering units with 1-4 relay status indicators, and is compatible with any EchoPod level sensor that's been configured with WebCal 6 software and updated to V50 firmware or higher. Powered by EchoPod, the field mount indicator may be located up to 4.5m (15') from the sensor. PodView requires no programming. The indicator repeats the measured value, applicable relay status and set point configuration of the attached sensor. If EchoPod relay set point changes are desired, they can be easily made through the field indicator.
Features :
- Indicates tank level or volume and relay status
- Enables EchoPod relay set point changes in the field
- Powered directly by the attached EchoPod sensor
- Corrosion resistant enclosure with NEMA 4 faceplate
Compatibility :
- EchoPod sensors operating on V50 firmware or higher
- V50 firmware is available via WebCal 6 software or higher
- Maximum distance between PodView & EchoPod is 4.5m(15")
| Display type | LCD, 6-digit with 4 relay indicators |
|---|---|
| Display units | Engineering |
| Display output | -99999 to 999999 |
| Character height | 0.374in (9.5mm) |
| Decimal point | Fixed |
| Dot indication | Relay status |
| User interface | Three button |
| Sensor input | EchoPod sensor |
| Supply voltage | Provided by EchoPod |
| Operating temp. | F: -4° to 140°, C: -20° to 60° |
| Cable type | 4-conductor, #22 AWG |
| Cable length | 6ft (1.8m) |
| Cable jacket | Polyurethane |
| Enclosure rating | Nema 4 (IP65) faceplate |
| Enclosure mat. | Polycarbonate |
| Enclosure type | Panel mount |
| Button material | Silicon rubber |
| Classification | General purpose |
| Compliance | CE |
| Document Title | Download |
|---|---|
| Datasheet | Click Here to Download |
| Manual | Click Here to Download |
| Quick Start | Click Here to Download |