LP50-X005
Application
The general purpose non-intrusive capacitance level switch provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. Media examples include hydrochloric, sulfuric acid and water. The liquid level sensor is bracket mounted on the exterior wall of non-metallic tanks and applied as a high level alarm or low level alarm.
Features:
- Non-intrusive level detection through plastic or fiberglass walls
- Installed with polyethylene, polypropylene or PVDF adhesive 3M mounting brackets
- Rugged PSO enclosure rated NEMA 4X with conduit connector
- 60VA relay selectable NO or NC via power supply wiring polarity
Accuracy | ± 1mm in water |
---|---|
Dielectric Range | > 10 constants |
Conductive Range | > 100 μ |
Supply Voltage | 12-36 VDC |
Consumption | 25 mA Maximum |
Contact Type | SPST Relay |
Contact Rating | 60 VA, 1A Maximum |
Contact Output | Selectable NO / NC |
Process Temperature | -40°F to 176°F (-40°C to 80°C) |
Enclosure Rating | NEMA 4X (IP65) |
Enclosure Material | PSO |
Cable Jacket Material | Polypropylene |
Cable Type | 4-conductor, shielded #22 AWG |
Cable Length | 10ft (3m) |
Conduit Entrance | 1/2in NPT |
Tank Material Comp | Non-metallic |
Tank Mounting | Bracket w/3M adhesive, plastic thermal weld |
Tank Wall Thickness | < 1 |
Classification | General purpose |
Compliance | CE |
Type | Level Switch |
Series | LP50 |
Document Title | Download |
---|---|
Datasheet | Click Here to Download |
Manual | Click Here to Download |
Brochure | Click Here to Download |