LXXXXXXXX-XXXXX

PULSAtron XXXX-XX-XXXXXXXXX Chem-Tech Series 200

Price: $6094.00

When considering performance, reliability, and cost of ownership, the PULSAtron Series M is the value leader in the category. Pulsafeeder continues to lead the way with a tradition of quality.

Industrial Construction
Product contamination and leakage are eliminated by using a mechanically actuated diaphragm design. The PULSAtron Series M was designed with the highest level of component modularity. Series M pumps are available with multiple levels of the most intelligent and exclusive controllers in the industry from the DLC (Digital Logic Controller), DLCM (Digital Logic Controller) both with PULSANET, to the ECA (Electronic Control Assembly) or the MPC (Metering Pump Controller). Check valves are easily replaced as a unit to save time. A stroke lock mechanism maintains the accuracy of the stroke setting. The mechanism is housed in a greased, sealed housing for virtually 'wear-free' operation.

PULSAtron Series M

PULSAtron Series M uses a mechanically actuated diaphragm. The diaphragm is mechanically attached to the reciprocating piston. The reciprocating diaphragm displaces controlled volume of process fluid through the suction and discharge valve mechanism. This eliminates hydraulic fluid, simplifies maintenance, and minimizes power requirements. This also helps prevent product contamination and leakage. Series M provides precise flow control. A large, easy-to-grip handwheel with 1% graduations allows control of the stroke setting to a resolution capability 1/4% over a range from 1-100%. Accuracy is better than +/- 2% of rated capacity. The PULSAtron Series M is highly adaptable. It's simple to install with a small footprint and multiple motor orientation. Series M is able to fit any space requirement.

Operating Benefits:
  • Reliable metering performance.
  • Affordable.
  • Ease of use and maintenance
Features :
  • Pressures to 305 psi (21.0bar), Flows to 76.4 gph (289.0 lph)
  • Accuracy +/- 2%
  • Motor adapters accept both NEMA and IEC motor frame sizes.
  • Enclosure rating: NEMA 4/IP55
  • Manual Stroke Length Adjustment with mechanical locking device
  • Lubrication: Greased for Life
  • Each pump is tested to insure capacity and pressure.
 
Pump Head Materials316 SS, PVC, PVDF
Seat O-Rings Available020 SS, 316 SS, PVC, PVDF
Balls AvailableALA, HCO, 316 SS
DiaphragmsPTFE-faced CSPE-backed
Pump Controls LinksAutomatically controls and displays flow with a 4-20 mA input, Handheld keypad attached to pump with 4.5 ft of cable, Manual stroke control, Controls pumps up to a 1000:1 turndown ratio, Displays flow rate of the pump in gph or lph
GasketsPTFE
Connection Size Available0.5", 0.75", 1", 1.5" x 1", Threaded Female NPT, Threaded Female BSPT, Flanged ANSI, Flanged DIN
Product OptionsMPC Motor - Metering Pump Controller
AccessoriesKOP Kits, Pressure Relief Valves, Pulsation Dampeners, PulsabLue, Calibration Columns, Pressure Gauges
Document TitleDownload
Model number codeClick Here to Download
BrochureClick Here to Download
Tech SheetClick Here to Download
Other DocumentsClick Here to Download
IDShort DetailsPrice 
L6S8EMSAP-XXXXXModel: Required HP 3/4 or .55 Kw, Model: Conn. Size, Inch, Model: 8, Liquid End Construction: Reagent Head PVC, Diaphragm TFE Faced, Ball ALA, Seat PVC, Gasket PTFE, Valve Cap PVC, Temp. Range F, C 0-104° -18-40°C, Control Type: Manual, Configuration: Simplex (Standard-gearbox on left), Motor Frame Adaptor: 56C, Connection Type Size: Threaded Female (NPT), Options: Options codes assigned by factory$6094.00