M5V-US
Finish Thompson Series M3V, M5V, M3V-UK, M5V-US Motor
Deprecated: base64_decode(): Passing null to parameter #1 ($string) of type string is deprecated in phar:///home/pni/wms/vendor/ProjectLibraries/WMS.phar/SingleProductAbstract.php on line 2232
Price: $475.17
ODP (Open Drip Proof), Splashproof, IP24 Variable Speed Motors
The MV Series motors incorporate an ON/OFF switch as well as a Variable Speed Control. When operating the MV Series for the first time it is recommended to turn down the speed control (Counter Clockwise) to the lowest setting. Make sure the discharge hose is properly secured. Turn on the motor with the ON/OFF switch & adjust the speed control to the desired flow rate. Both of these operations can be done with the same hand being used to support the pump utilizing the thumb. Keep in mind that flow rates will vary depending upon fluid viscosity & specific gravity. It may be necessary to operate the pump at a lower speed for high viscosity fluids. Contact factory for troubleshooting tips.
| Certification | CE |
|---|---|
| Requirements | 230V/50-60Hz |
| Input/Output (W) | 650/400 |
| RPM | 3,500-10,000 |
| Maximum Viscosity | 500 cP |
| Nominal Voltage | 230v |
| Input Power (HP) | 0.8 |
| Input Power (Watts) | 650 |
| Hertz | 50 / 60 |
| RPM™s (Variable Speed) | 3,500-10,000 |
| Enclosure | IP24 Splash-Proof |
| Max Viscosity (cps) | 500 |
| Max Viscosity (Density) | 1.8 |
| Duty Cycle | Continuous |
| Applicable Pump Models | PF / TB / TBP |
| Document Title | Download |
|---|---|
| MV Series Motors Manual | Click Here to Download |