March Pump's industrial TE-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread.
- O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
- Shaft: Ceramic or 316 Stainless Steel
- Imp. Bushing: Carbon or Mica Teflon
- Impeller: Polypropylene, Carbon Filled Kynar, Natural Kynar, Ryton, or 316 Stainless Steel
Applications for the TE-5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners.
The TE-5C-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5C-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5C-MD for any of the above listed chemicals.
|Max Flow Rate - 50Hz||15.9 GPM (60 LPM)|
|Max Flow Rate - 60Hz||18 GPM (68.1 LPM)|
|Max Head - 50Hz||20.7 FT (6.3 M)|
|Max Head - 60Hz||29 FT (8.85 M)|
|Power - 50Hz||.02 HP (.019 KW )|
|Power - 60Hz||.02 HP (.019 KW )|
|Wet End||316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|