March Pump's industrial TE-6P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread.
- O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene
- Front Thrust Washer: Ceramic or Hastelloy
- Shaft: Ceramic, Hastelloy, or 316 Stainless Steel
- Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon
- Motor Bracket: Aluminium or Plastic
Applications for the TE-6P-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, silver recovery systems, and marine air conditioners.
The TE-6P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-6P-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-6P-MD for any of the above listed chemicals.
Type | Centrifugal Mag Drive |
---|---|
Series | DP-6T-MD, TE-6T-MD, TE-6K-MD, TE-6P-MD |
Max Flow Rate - 50Hz | _, 30 GPM (113.5 LPM) |
Max Flow Rate - 60Hz | 38 GPM (144 LPM) |
Max Head - 50Hz | _, 36 FT (11 M) |
Max Head - 60Hz | 49 FT (15 M) |
Power - 50Hz | _, .375 HP (.279 KW) |
Power - 60Hz | .5 HP (.37 KW), .5 HP (.372 KW) |
Electrical | 1PH 115/208/230V 60HZ, 1PH 115/208/230V 60HZ, 115/230V 50HZ, 3PH 208/230/460V 60HZ, 230/460V 50HZ |
Submersible | _ |
Inlet | 1in FPT |
Outlet | 3/4in MPT |
Wet End | Polypropylene (Impeller), Ryton (Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing), Carbon Filled Kynar (Front Housing, Rear Housing, Impeller), Ceramic (Shaft, Thrust Washers), Viton (O-Ring), Ca |
Uses | _ |