March 0135-0006-0400 MDX-3-1/2 Centrifugal Pump Magnetic Drive
March 0135-0006-0400 MDX-3-1/2 115V Centrifugal Pump Magnetic Drive
March Pump’s industrial MDX-3-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 19 Feet (8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDX-3-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Applications for the MDX-3-1/2 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
The MDX-3-1/2 has pumped Acetic Acid, Ammonium Hydroxide, Potassium Carbonate, Sodium Chloride, Sodium Cyanide, Sodium Nitrate, Zinc Sulfate, Fresh Water, Salt Water, and many more chemicals. The MDX-3-1/2 may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.
|Wet End||Polypropylene (Front Housing and Impeller), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet|
|Max Internal Pressure||50 psi ( 3.4 bar)|
|Max Liquid Temperature||190 °F (87 °C)|
|Max Flow Rate||8.5 GPM (32.2 LPM)|
|Max Head||19 FT (5.8 M)|
|Power||0.04 HP (0.03 KW)|
|Max Flow Rate||7.9 GPM (30 LPM)|
|Max Head||13.1 FT (4 M)|
|Power||0.004 HP (0.03 KW)|
|Position||Part Number||Part Details||Required Quantity||Visualize||Price|
|1||0135-0180-1000||March #10-32 x 1" Long Screw (Stainless)||4||$1.00|
|3||0135-0007-1000||March 1/16" CS x 3" OD "O" Ring (Buna N)||1||$3.00|
|3||0135-0134-1000||March 1/16" CS x 3" OD "O" Ring (Teflon Encapsulated Viton)||1||$365.00|
|3||0750-0053-1000||March 1/16" CS x 3" OD "O" Ring (EPDM)||1||$6.00|
|4||0135-0042-1000||March #8-32 x 1/4" Long Screw (Stainless)||1||$1.00|
|5||0802-0057-1000||March Thrust Washer (Ryton/Teflon/Carbon)||1||$1.00|
|6||0135-0043-0100||March 2.062 Dia. Impeller with Bare Ceramic Magnet (Polypropylene)||1||$17.00|
|6||0135-0130-0200||March 2.062" Dia. Encapsulated Impeller (Polypropylene)||1||$46.00|
|9||0618-0027-1000||March #8-32 x 5/8" Long Screw (Stainless)||4||$0.50|
|10||0620-0010-1000||March #8 Lock Washer (Stainless)||4||$0.30|
|12||0135-0036-1000||March Motor, 1 Phase, 115V, 50/60 Hz, 3450 RPM||1||$135.00|
3 Foot Cord
60Hz: 1Ph 115V 0.04HP/0.03kW, 1.55 AMPS, 3450 RPM
50Hz: 1Ph 115V 0.04HP/0.03kW, 1.55 AMPS, 2850 RPM
3 Foot Cord
60Hz: 1Ph 230V 0.04HP/0.03kW, 0.7 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.04HP/0.03kW, 0.7 AMPS, 2850 RPM
2 WARNING:This product can expose you to chemicals including Ethylene Oxide, which is know to the state of California to cause cancer or birth defects or other reproductive harm.
4 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.
5 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.