March 0135-0036-0100 MDX-MT3 Centrifugal Pump Magnetic Drive
March 0135-0036-0100 MDX-MT3 115V Centrifugal Pump Magnetic Drive
March Pump’s industrial MDX-MT3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 16 Feet (7PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
- O-Ring: Viton, Teflon, or Ethylene Propylene
- The front housing, rear housing, and impeller are available in Polypropylene.
Applications for the MDX-MT3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
The MDX-MT3 has pumped Acetic Acid, Acetone, Benzene Sulfonic Acid, Citric Acid, Ethanolamine, Freon 11, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, DI Water, and many more chemicals. The MDX-MT3 may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.
|Wet End||Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)|
|Max Internal Pressure||50 psi ( 3.4 bar)|
|Max Liquid Temperature||190 °F (87 °C)|
|Max Flow Rate||8 GPM (30.3 LPM)|
|Max Head||16 FT (4.8 M)|
|Power||0.04 HP (0.03 KW)|
|Max Flow Rate||7.9 GPM (30 LPM)|
|Max Head||11.5 FT (3.5 M)|
|Power||0.004 HP (0.03 KW)|
|Position||Part Number||Part Details||Required Quantity||Visualize||Price|
|1||0135-0181-1000||March #10-32 x 1-1/8" Long Screw (Stainless)||6||$1.00|
|2||0150-0051-1000||March #10 Washer||6||$0.75|
|3||0135-0088-1000||March Front Housing with 1/2" MPT Inlet & Outlet (Ryton)||1||$21.00|
|3||0135-0128-1000||March Front Housing with 1/2" MPT Inlet & Outlet (Polypropylene)||1||$365.00|
|4||0135-0046-1000||March 1/16” CS x 2-7/8” OD “O” Ring (Viton)||1||$4.00|
|4||0750-0150-1000||March 1/16" CS x 2-7/8" OD "O" Ring (EPDM)||1||$6.00|
|5||0130-0028-1000||March Thrust Washer (Ceramic)||1||$4.00|
|6||0130-0024-1000||March Shaft (Ceramic)||1||$10.00|
|7||0135-0113-0200||March Impeller (Ryton)||1||$54.00|
|7||0135-0129-0200||March Impeller (Polypropylene)||1||$365.00|
|8||0135-0087-1000||March Rear Housing (Ryton)||1||$13.00|
|8||0135-0127-1000||March Rear Housing (Polypropylene)||1||$365.00|
|9||0130-0043-0100||March 0.250" Bore Drive Magnet||1||$50.00|
|12||0135-0114-1000||March Motor, 1 Phase, 115V, 50/60 Hz||1||$128.00|
3 Foot Cord
60Hz: 1Ph 115V 0.04HP/0.03kW, 1.35 AMPS, 3450 RPM
50Hz: 1Ph 115V 0.04HP/0.03kW, 1.35 AMPS, 2850 RPM
3 Foot Cord
60Hz: 1Ph 230V 0.04HP/0.03kW, 0.85 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.04HP/0.03kW, 0.8 AMPS, 2850 RPM
2 WARNING:This product can expose you to chemicals including Ethylene Oxide, which is know to the state of California to cause cancer or birth defects or other reproductive harm.
4 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.
5 WARNING:This product can expose you to chemicals including Lead, which is know to the State of California to cause cancer or birth defects or other reproductive harm.