Blue White TB-500MI-LPM1 Digital Paddlewheel Flowmeter | F-1000

Sensor mounted on pipe fitting. Battery operated.

Blue-White® BW DIGI-METER® F-1000 and F-2000 Digital Paddlewheel Flowmeter model numbers include a pipe fitting as part of the complete model number. Although it is possible to purchase the pipe fittings separately, it is not necessary. F-1000 models can only replace pipe fitting with original type and size.

• High accuracy digital paddlewheel technology
• Tamper proof factory programming
• Very low pressure drop
• Total reset function can be disabled
• Easy to read 6 digit LCD, up to 4 decimal positions
• Battery Operated (2 AAA batteries included)
• Acceptable for Vertical or Horizontal insallation
• Total Reset function can be disabled
• Display update time: Rate 1.5 sec., Total 0.5 sec.
• Factory calibrated -; Nothing to program
• NEMA 4X weather resistant enclosure
• LCD not recommended for direct sunlight exposure
• Standard Models ship with pipe fitting included.

Note: Maximum continuous flow should not occur in the upper 25% of the flow range. Refer to Instruction Manual

Minimum Straight Pipe Length Requirements
The meter’s accuracy is affected by disturbances such as pumps, elbows, tees, valves, etc., in the flow stream. Install the meter in a straight run of pipe as far as possible from any disturbances. The distance required for accuracy will depend on the type of disturbance.